Search for tag: "tuner"

Maury Microwave IMS 2023 Booth Walkthrough

Maury Microwave walks through their 12 demo lab test/measurement stations at IMS 2023 in San Diego.

From  Microwave Journal 0 likes 3,390 plays 0  

EuMW 21 - On-wafer passive load pull for 5G FR2 frequencies

At EuMW 2021, Steve Dudkiewicz, Vice President, Marketing & Business Development, demonstrated Maury's latest automated impedance tuner, the Nano5G. The Nano5G is the industry's…

From  Microwave Journal 0 likes 6 plays 0  

Tech Fair 2021 - An Introduction to Impedance Tuners

Load Pull is the act of presenting a set of controlled impedances to a device under test (DUT) and measuring a set of parameters at each point. By varying the impedance, it is possible to fully…

From  Microwave Journal 0 likes 3 plays 0  

RWW 21 - Measurement and Characterization of High Power Devices for mmW Applications

Tekamul Buber, Senior Principal Engineer at Maury Microwave, discusses the measurement methods, calibration essentials, and load pull requirements for high-power mmW device characterization,…

From  Microwave Journal 0 likes 5 plays 0  

SC 21 - Device to circuit and system characterization and modeling

Part of IIT Kanpur's 2021 short course on modeling and simulation of nano-transistors. Dr. Zacharia Ouardirhi of AMCAD Engineering presents on theory and execution of compact transistor…

From  Microwave Journal 0 likes 6 plays 0  

EuMW 20 - Fundamentals of Large Signal Characterization and High Power Amplifier Design

Osman Ceylan, Senior Application Engineer at Maury Microwave, discusses large signal operation including high-efficiency requirements in today's device technologies as well as the fundamentals…

From  Microwave Journal 0 likes 4 plays 0  

EuMW 20 - Modeling of High-Power RF Transistors and Applications

Mitra Gilasgar, Principle Design Engineer at Ampleon, introduces a modeling flow used to model high-power RF transistors. Mitra starts with power amplifier basics, an introduction to LDMOS…

From  Microwave Journal 0 likes 4 plays 0  

(2/4) Load Pull measurements & transistor model validation

Load pull measurements are used to validate a transistor compact model. An overview of load pull is presented, then model refinement is presented with different criteria.

From  Microwave Journal 0 likes 5 plays 0  

Mach 2.7 Electronic Solid State Tuner

Maury launched the revolutionary Mach2.7 Electronic Solid State Tuner at IMS 2013. The Mach2.7 is capable of extremely fast tuning (mS's per impedance) between 400 MHz and 2.7 GHz and is ideal…

From  Microwave Journal 0 likes 3 plays 0