|
|
Keysight demonstrates the new E5081A ENA-X VNA that comes in 20 and 44 GHz with 2 or 4 port options and can make many measurements such as S-parameters, gain compression, EVM, ACPR, spurious, NPR,…
|
|
|
R&S demonstrates their VNA measurements of a 67 GHz amplifier including S-parameters, intermodulation, compression point and even noise figure at IMS 2023 in San Diego.
|
|
|
The first live demonstration of the most advanced Analog-to-Digital Converter (ADC) from Teledyne e2v Semiconductors, EV10AS940. The latest 10-bit single channel 12.8 GSps ADC, with a max total power…
|
|
|
Maury Microwave reviews their demonstrations at EuMW 2022 in Milan ranging from low MHz to THz.
|
|
|
Clinton Linville, Application Engineer at Rohde & Schwarz, shows the unique features of the R&S mmWave CATR from OTA testing operating to 90 GHz.
|
|
|
Dr Jonas Urbonas provides an overview of hybrid-active harmonic load pull measurements using a 4-port 4-source R&S ZNA, and an extension of the ZNA with large-signal time-domain analysis and EPHD…
|
|
|
Automatic Fixture Removal (AFR) is an intuitive software plug-in that is used to accurately measure hard-to-access devices, such as SMD-sized components mounted on a fixture by de-embedding the…
|
|
|
LIN03 is a linear actuator for corner reflector used for radar testing
MilliBox mmWave Antenna Test System consists of a mmWave compact anechoic chamber and 3D antenna positioner product line.…
|
|
|
Maury Applications Engineer, John Dominguez provides an introduction to active load pull and the MT2000 mixed-signal active load pull system. John then performs a comprehensive demonstration of the…
|
|
|
Vector receiver load pull, also referred to as real-time load pull, has become the preferred load pull methodology of the 2010s and 2020s. Vector receiver load pull replaces a traditional scalar…
|
|
|
During the initial stages of device technology development, timely feedback to device development engineers is important to accelerate the development process. Quickly and accurately benchmarking…
|
|
|
Learn about the differences between Short, Open, Load, and Thru (SOLT) calibration and Short, Open, Load, Reciprocal (SOLR) calibration.
|
|
|
In this video, Chase Gibson highlights the impact of a cable assembly's slow degradation over time on your measurements, and explains a process to objectively identify the cable's…
|
|
|
Tekamul Buber, Senior Principal Engineer at Maury Microwave, discusses the measurement methods, calibration essentials, and load pull requirements for high-power mmW device characterization,…
|
|
|
Tekamul Buber, Senior Principal Engineer at Maury Microwave, discusses the motivation of using S-parameters with uncertainty, compares traditional and enhanced VNA measurement models, and finally…
|
|
|
Dr Jonas Urbonas provides an overview of fully-active harmonic vector receiver load pull using IVCAD and a 4-source ZNA.
He starts with explaining the motivation and challenges, proceeds to…
|