|
|
Learn how to download and create a Libero project to gain precious time in development of your space receiver design using ADC EV12AQ600 and FPGA PolarFire.
EV12AQ600 ADC qualification report:…
|
|
|
mmTron discusses the challenges of direct conversion and other ADC/DAC issues that they are addressing with interface chips enabling up to 64 GS/s speeds at EuMW 2023 in Berlin.
|
|
|
Learn how MATLAB and Simulink can be used for modeling RF and mmWave transceivers, performing RF budget analysis, and simulating wideband adaptive architectures. These will include RF components such…
|
|
|
Combining an array of 12 amplifiers, the scalable and liquid cooled Model 2247 is a 30kW peak pulsed transmitter capable of long and short pulses between 5.4 and 5.9GHz. Designed for mission critical…
|
|
|
Jeff Gengler, Qorvo, talks with Eric Higham, Microwave Journal, about new highly integrated 5G products released for IMS 2023 in San Diego.
|
|
|
The first live demonstration of the most advanced Analog-to-Digital Converter (ADC) from Teledyne e2v Semiconductors, EV10AS940. The latest 10-bit single channel 12.8 GSps ADC, with a max total power…
|
|
|
This tutorial video explains how to create a Vivado project to implement ADX4 IP on a Kintex Ultrascale FPGA starting from a VHDL design example and using EV12AQ600-ADX-EVM demo board. This tutorial…
|
|
|
An overview of the GUI for Empower RF’s Model 2244, a pulse high power liquid cooled amplifier. The local and remote interfaces are the same and shown in this live demo. Parameters covered…
|
|
|
Kerem Ok, Product Line Director at Analog Devices, shows a 7.2 split 5G O-RAN compliant mmWave, 24-47 GHz, system using fully designed by ADI with 58 dBm of output power accelerating designs for…
|
|
|
Eric Bonelli, Application Engineer at Wolfspeed, demonstrates a 200 W, dual transistor, S-Band pallet with about 44% efficiency at 2.5 GHz and about 36 dB large signal gain.
|
|
|
Greg Bonaguide, Applications Engineer at R&S, demonstrates a D-Band (110-170 GHz) solution showing measurement of IMD on an amplifier.
|
|
|
Ruben Zarrabi from Richardson RFPD and Bernie Gobeil from SignalCraft Technologies discuss a new family high performance frequency converters covering 24 to 44 GHz.
|
|
|
Nizar Messaoudi, Product Manager at Keysight, demonstrates some of the PNA-X features including signal generation and time domain signal analysis by doing power amplifier measurement.
|
|
|
Maury Applications Engineer, John Dominguez provides an introduction to active load pull and the MT2000 mixed-signal active load pull system. John then performs a comprehensive demonstration of the…
|
|
|
Vector receiver load pull, also referred to as real-time load pull, has become the preferred load pull methodology of the 2010s and 2020s. Vector receiver load pull replaces a traditional scalar…
|
|
|
During the initial stages of device technology development, timely feedback to device development engineers is important to accelerate the development process. Quickly and accurately benchmarking…
|