|
|
Brian Walker from Copper Mountain demonstrates how their Automatic Fixture Removal software de-embeds to the desired reference plane quickly and easily. Sponsored by Copper Mountain Technologies.
|
|
|
Keysight demonstrates their PNA-X showing a wideband satellite communications modulation and demodulation setup plus characterization and calibration of phased array antennas at IMS 2023 in San Diego
|
|
|
Keysight demonstrates testing a non-terrestrial network (NTN) setup using a base station emulator and 5G NTN enabled phone unit at IMS 2023 in San Diego.
|
|
|
Anritsu shows off their new VNA PhaseLync system accurate up to a distance of 100 meters at IMS 2023 in San Diego.
|
|
|
MilliBox is an affordable, modular, flexible mmwave antenna test system, which can be setup easily to measure phased array radiation pattern. Here we are using MilliBox MBX02 compact mmWave chamber…
|
|
|
Stan Oda, Product Marketing Manager at Mini-Circuits, demonstrates the eVNA that operates from 300 kHz to 6 GHz with a powerful software package that operates in the time domain with offline analysis…
|
|
|
Nizar Messaoudi, Product Manager at Keysight, demonstrates some of the PNA-X features including signal generation and time domain signal analysis by doing power amplifier measurement.
|
|
|
MilliBox is an affordable, modular, flexible mmwave antenna test system, which can be setup easily to measure phased array radiation pattern.
Here we are using MilliBox MBX02 compact mmWave chamber…
|
|
|
This demo is done using the soon to be released S5243 2-port 43 GHz Compact VNA. Frequency offset measurement capability is standard on all Copper Mountain Technologies two and four-port VNAs. This…
|
|
|
TRL refers to Thru Reflect Line Calibration and is intended for full 2-port calibration. Learn how to perform TRL calibration and the benefits of doing so.
|
|
|
This video shows the proper technique to connect airlines when performing VNA calibrations.
|
|
|
How many times have you completed a series of measurements to find them tainted by a bad cable? The Confidence Check feature of the Automatic Calibration Module (ACM) will verify your test setup.…
|
|
|
In this edition of Coonrod’s Corner, John Coonrod explains how glass-weave affects millimeter-wave PCB performance. Many laminates used in the high-frequency industry have a layer or multiple…
|